Skip to content

DNSMASQ DHCP/DNS Configuration Testing (Day 1)

Work Completed

On this date, the following was completed:

  • Worked through some syntax/logic errors for the DNSMASQ DHCP/DNS logic while running the project in changed/production mode to make the desired XML changes.
  • Started looking into the configuration of RouterOS for vlan use for configuration testing.

Current Status / Next Steps:

Going forward, I will be doing the following:

  • Continuing to test the configuration to the test firewall instance in GNS3 and verifying afterward that traffic flow is working correctly for DNS/DHCP.
    • Start working to configure a Mikrotik instance for testing as well (to replicate a similar RoAS configuration that will later be used in production)